Uses Indirect ambiance lighting for squares, pedestrian areas,
parks and residential and urban roads.
Description
The Alabama indirect light fittings are composed of an aluminium shaft,
a moulded aluminium head housing the optic, three brackets and an upper
reflector.
Heat treated glass glued to an aluminium cover with silicone ensures that
the fitting is watertight.
The optics is made of stamped, shiny and anodised aluminium.
The upper reflector is made of polyster resin reinforced with glass fibre.The
inside of the reflector is filled with an injected polyurethane foam.
Mounting and Installation
Maintenance
Opening and closing:
By three, quarter turn by stainless screws on the cover.
A neoprene gasket ensures the connexion between the head and the cover
is watertight.
Access to the lamp and fittings:
The lamp can be accessed directly after the cover has been opened.The
electrical supply fittings are mounted on a control gear tray located in
the shaft.
Electrical and Mechanical features
Watertight optic : IP 66
Class I
Class II
Shock : IK 08 (glass)
Finish
Shaft, head and arm : heat resistant polyster coating
Choice of RAL colors.
Sanded finish according to Futura colour chart (Akzo Nobel).
Upper reflector : white gel coat, rough lower face, smooth upper face.
Nomenclatures of lamps
Alabama - indirect lighting - power and type of lamp - electrical safety.
Example : ALA - IND - 150 W MBI - CI II.